PET film laser cutting machine

Overview of PET film

PET film is a thermoplastic polyester that can be laser cut, marked, and engraved. The chemical name of PET is polyethylene terephthalate. PET thin film laser cutting can be carried out using CO2 laser with a wavelength of 9.3 or 10.6 microns. However, laser marking of PET thin films requires a 9.3 micron CO2 laser. The 9.3 micron laser wavelength is absorbed on the surface of the PET film, forming a white frosted surface marker. Surface marking will not affect the integrity of the PET film.

PET film is a packaging film with comprehensive performance. Good transparency and luster; Good airtightness and aroma; Moderate moisture resistance, reduced low temperature moisture permeability. PET film has excellent mechanical properties, and its toughness is the best among all thermoplastic materials. Its tensile strength and impact strength are much higher than ordinary films; Good strength, stable size, suitable for secondary processing such as printing and paper bags. PET film also has excellent heat resistance, cold resistance, chemical resistance, and oil resistance. But not resistant to strong alkalis; It is prone to static electricity and there is no suitable anti-static method. When packaging powder items, attention should be paid.

Product parameters:
Working method: solid line, dashed line, wavy line, marking, punching, half cutting, die cutting, etc
Working area: Left and right movement distance 0-1000mm (customized according to the width of the slitter)
Fastest: Dotting/scoring/cutting speed 260/min (solid line) 300m/min (dashed line)
Laser power: 60-300W (imported laser)
Minimum line width: 0.02mm
Repetitive accuracy: 0.001mm
Working temperature: 0 ° C-40 ° C
Power: 1000W
Supported formats: AI/CDR/PCT/DXF and other file formats
Gas consumption: 5L/min